Saltar al contenido principal

Gateway LT2104u RAM Replacement Guide

Qué necesitas

  1. Gateway LT2104u RAM Replacement Guide, RAM: paso 1, imagen 1 de 1
    • Locate the the "L" shaped cover on the back, lower right hand side the device. Using a Philips screwdriver, remove the screw holding it in.

  2. Gateway LT2104u RAM Replacement Guide: paso 2, imagen 1 de 2 Gateway LT2104u RAM Replacement Guide: paso 2, imagen 2 de 2
    • Gently lift the cover until it detaches from the device.

  3. Gateway LT2104u RAM Replacement Guide: paso 3, imagen 1 de 2 Gateway LT2104u RAM Replacement Guide: paso 3, imagen 2 de 2
    • Gently push the levers on each side of the stick of RAM away from each other until the RAM springs into a 45° angle.

  4. Gateway LT2104u RAM Replacement Guide: paso 4, imagen 1 de 1
    • Carefully remove the stick of RAM by pulling at the same 45° angle the RAM is currently at until it detaches from the device.

  5. Gateway LT2104u RAM Replacement Guide: paso 5, imagen 1 de 1
    • When inserting the new stick of ram, be sure to insert it at the same 45° angle that the old stick of ram was taken out at. Press the stick of RAM down until it clicks into place.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Chris Sullivan

Miembro Desde 03/29/16

234 Reputación

2 Guías creadas

Equipo

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 3

Todo El Tiempo: 319