Introducción

The RAM can be replaced if you have a Phillips #0 screwdriver.

Partes

No se requieren partes.

  1. Unlock the tab located in the top left corner of the netbook. The red tab indicated that the battery has been properly unlocked. Remove the battery.
    • Unlock the tab located in the top left corner of the netbook.

    • The red tab indicated that the battery has been properly unlocked.

    • Remove the battery.

    • When working with electronics, it is always wise to remove the power source before taking the device apart.

  2. The RAM is located under this cover.
    • The RAM is located under this cover.

  3. ¡Envío gratuito para todos los pedidos de más de USD100.00 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  4. Using a Phillips #0 screwdriver, remove one (1) 5mm screw holding the cover in place. Use a plastic opening tool to remove the cover. Use a plastic opening tool to remove the cover.
    • Using a Phillips #0 screwdriver, remove one (1) 5mm screw holding the cover in place.

    • Use a plastic opening tool to remove the cover.

  5. Unlock the RAM by pinching the metal clamps that keep the RAM in place. Remove the RAM while the metal clamps are disengaged.
    • Unlock the RAM by pinching the metal clamps that keep the RAM in place.

    • Remove the RAM while the metal clamps are disengaged.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Lydia Benjock

Miembro Desde 18/10/13

1,189 Reputación

10 Guías creadas

Equipo

Clemson, Team 14-3, Benson Fall 2013 Miembro de Clemson, Team 14-3, Benson Fall 2013

CLEM-BENSON-F13S14G3

3 Miembros

22 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 15

Todo El Tiempo: 1,649