Repara tus cosas Comunidad Tienda

Gateway 600YGR RAM Replacement

Introducción

This guide provides the step by step directions for removing and replacing damaged RAM Logic boards in a Gateway 600YGR. There are no prerequisite guides that need to be completed in order to use this guide. A Philips Head screwdriver and the PH 1 bit are required to complete the guide.

Qué necesitas

  1. Gateway 600YGR RAM Replacement, RAM: paso 1, imagen 1 de 2 Gateway 600YGR RAM Replacement, RAM: paso 1, imagen 2 de 2

    • Flip the computer over so that the bottom of your device is face up.

    Editar

  2. Gateway 600YGR RAM Replacement: paso 2, imagen 1 de 3 Gateway 600YGR RAM Replacement: paso 2, imagen 2 de 3 Gateway 600YGR RAM Replacement: paso 2, imagen 3 de 3

    • Use a Philips head screwdriver and the PH1 bit to remove the indicated 5.35mm screw.

    • Remove the cover panel.

    Editar

  4. Gateway 600YGR RAM Replacement: paso 3, imagen 1 de 3 Gateway 600YGR RAM Replacement: paso 3, imagen 2 de 3 Gateway 600YGR RAM Replacement: paso 3, imagen 3 de 3

    • Locate the indicated tabs on the edges of the top RAM board.

    • Pull the tabs outward and the RAM board will release.

    • Remove the RAM board.

    Editar

  5. Gateway 600YGR RAM Replacement: paso 4, imagen 1 de 2 Gateway 600YGR RAM Replacement: paso 4, imagen 2 de 2

    • Locate the indicated tabs on the edges of the bottom RAM board.

    • Pull the tabs outward.

    • Remove the RAM board.

    Editar

  6. Gateway 600YGR RAM Replacement: paso 5, imagen 1 de 2 Gateway 600YGR RAM Replacement: paso 5, imagen 2 de 2

    • You have now successfully removed the RAM boards.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 4

Todo El Tiempo: 159