Saltar al contenido principal

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Gateway 600YG2 System Fan Replacement

Qué necesitas

  1. Gateway 600YG2 System Fan Replacement, Battery: paso 1, imagen 1 de 1
    • Flip the laptop over.

    • Slide the battery release tab to the right with your index finger to open the battery cover.

  2. Gateway 600YG2 System Fan Replacement: paso 2, imagen 1 de 1
    • Remove the battery cover using the tab on the right side.

    • Take the battery out with your index finger.

  3. Gateway 600YG2 System Fan Replacement, Keyboard: paso 3, imagen 1 de 1
    • Remove the 5 screws holding the keyboard in place.

  4. Gateway 600YG2 System Fan Replacement: paso 4, imagen 1 de 2 Gateway 600YG2 System Fan Replacement: paso 4, imagen 2 de 2
    • Potential for device damage: When lifting the keyboard out, do not lift the keyboard up. Only fold back along the space bar edge.

    • Potential for device damage: Do not pull the black cable by the ribbon section. Only pull it from the connector itself.

    • Follow the black ribbon cable to the connector and gently pull straight up.

  5. Gateway 600YG2 System Fan Replacement, System Fan: paso 5, imagen 1 de 2 Gateway 600YG2 System Fan Replacement, System Fan: paso 5, imagen 2 de 2
    • Unscrew the 4 captive screws.

    • Unplug fan from the system and pull it out. The fan unit should slide forward before coming free.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Equipo

Cal Poly, Team 20-10, Maness Fall 2010 Miembro de Cal Poly, Team 20-10, Maness Fall 2010

CPSU-MANESS-F10S20G10

3 Miembros

22 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 3

Todo El Tiempo: 2,273