Repara tus cosas Comunidad Tienda

Garmin nuviCam LMTHD Motherboard Replacement

Qué necesitas

  1. Garmin nuviCam LMTHD Motherboard Replacement, Screen: paso 1, imagen 1 de 2 Garmin nuviCam LMTHD Motherboard Replacement, Screen: paso 1, imagen 2 de 2

    • Remove the four 6.9 mm black screws using the T6 screw bit.

    Editar

  2. Garmin nuviCam LMTHD Motherboard Replacement: paso 2, imagen 1 de 2 Garmin nuviCam LMTHD Motherboard Replacement: paso 2, imagen 2 de 2

    • Pry the device open using a plastic opening tool.

    • We suggest starting from the dash camera side for easier opening

    • You may have to use a little force, the screen is hard to remove.

    Editar

  3. Garmin nuviCam LMTHD Motherboard Replacement: paso 3, imagen 1 de 1

    • Disconnect the black and red wire from the screen.

    Editar

  4. Garmin nuviCam LMTHD Motherboard Replacement: paso 4, imagen 1 de 2 Garmin nuviCam LMTHD Motherboard Replacement: paso 4, imagen 2 de 2

    • Disconnect the orange strip by flipping up the connector with a plastic opening tool and sliding the cable out.

    Editar

  6. Garmin nuviCam LMTHD Motherboard Replacement, Motherboard: paso 5, imagen 1 de 1

    • Disconnect battery wire from motherboard.

    Editar

  7. Garmin nuviCam LMTHD Motherboard Replacement: paso 6, imagen 1 de 1

    • Disconnect yellow ribbon cable from motherboard.

    Editar

  8. Garmin nuviCam LMTHD Motherboard Replacement: paso 7, imagen 1 de 1

    • Pull off black and red wire from screen.

    Editar

  9. Garmin nuviCam LMTHD Motherboard Replacement: paso 8, imagen 1 de 1

    • Disconnect the orange cable strip connected to the screen using a plastic opening tool, lift white teeth up and slide strip out.

    Editar

  10. Garmin nuviCam LMTHD Motherboard Replacement: paso 9, imagen 1 de 1

    • Remove silver plate from motherboard.

    Editar

  11. Garmin nuviCam LMTHD Motherboard Replacement: paso 10, imagen 1 de 2 Garmin nuviCam LMTHD Motherboard Replacement: paso 10, imagen 2 de 2

    • Remove all six 5.74mm screws from motherboard using the T4 screw bit.

    Editar

  12. Garmin nuviCam LMTHD Motherboard Replacement: paso 11, imagen 1 de 2 Garmin nuviCam LMTHD Motherboard Replacement: paso 11, imagen 2 de 2

    • Lift motherboard out of device using plastic opening tools.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Un comentario

Where to buy the replacement mother board? I couldn't find one.

BTW: Nicely done guide.

pitt83 - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 5

Ultimos 30 días: 12

Todo El Tiempo: 627