Saltar al contenido principal

Garmin Vivoactive HR Display Replacement

Qué necesitas

  1. Garmin Vivoactive HR Display Replacement, Display: paso 1, imagen 1 de 1
    • Apply the Heated iOpener to the display for 30 seconds to soften the adhesive..

  2. Garmin Vivoactive HR Display Replacement: paso 2, imagen 1 de 1
    • Insert a spudger between the display and watch body.

    • Pry upwards and work the spudger around the perimeter of the display to free it from the body.

    • The display is still attached with ribbon cables so don't remove completely.

  3. Garmin Vivoactive HR Display Replacement: paso 3, imagen 1 de 1
    • Lift the touchscreen to expose ribbon cables that connect it to the main circuit board.

  4. Garmin Vivoactive HR Display Replacement: paso 4, imagen 1 de 2 Garmin Vivoactive HR Display Replacement: paso 4, imagen 2 de 2
    • Use the flat end of a spudger to disconnect the display cable press connectors from the motherboard.

Conclusión

To reassemble your device, follow these instructions in reverse order.

16 personas más completaron esta guía.

Chris Corry

Miembro Desde 07/05/18

256 Reputación

1 Guía escrita

Equipo

IUPUI, Team S2-G5, Harley Summer 2018 Miembro de IUPUI, Team S2-G5, Harley Summer 2018

IUPUI-HARLEY-SU18S2G5

3 Miembros

3 Guías creadas

19 comentarios

Hello,

thanks for this. Where can i buy the new screen?

Bowland Olan - Contestar

Nice guide! Thanks. But I can’t find any parts to repair my watch

Christoph Freydank - Contestar

Yeah, where can we get the parts from? Also how hard is it to change the battery? Thanks for your help :)

Rick - Contestar

What type of glue i use to connect the display an the body?

culibrkboj - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 17

Ultimos 30 días: 73

Todo El Tiempo: 25,666