Introducción

If your speaker is defective, obtain a new speaker and replace the old one with the new working speaker.

  1. Remove the barcode sticker at the bottom of the device.
    • Remove the barcode sticker at the bottom of the device.

    Agregar Comentario

  2. Remove two 8.4 mm T5 screws from the bottom of the device.
    • Remove two 8.4 mm T5 screws from the bottom of the device.

    Agregar Comentario

    • Using a plastic opening tool, carefully pry open the device.

    • Open the device carefully, making sure not to damage the gold ribbon cable that connects the screen to the motherboard.

    turn the unit around

    Andrew Hayden - Contestar

    Since there is no replacement speaker whats the point of this process?

    greg - Contestar

    Very detailed set of instructions! Does anyone known the thread size of the screws in step 2? 8.4 mm T5 screws: is the length of the screw (8.4 mm) ,and the head specification (T5- size of screw driver). I need the actual thread specification. I lost one of the screws and the other one 's head is stripped. I need to replace both screws.

    Harold Schultz - Contestar

  3. Reparte el espíritu de reparación esta Navidad
    Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
    Reparte el espíritu de reparación esta Navidad
    Obtén $12 de descuento en tu compra de $50 o más con el código FIXMAS12
    • Remove the power button.

    Where can I buy the button

    milosvalek - Contestar

    • Unscrew the four 6.70 mm screws holding the motherboard in place using a philips #0 screw driver.

    Agregar Comentario

    • Lift up the motherboard.

    • Carefully disconnect the battery and motherboard. Slowly wiggling the connection makes it easier to disconnect the battery from the motherboard.

    Agregar Comentario

    • Using the plastic opening tool as a wedge, pry the battery from the case. This can be fairly tough as the battery is glued to the case. Don't be afraid to use force and some good leverage.

    Agregar Comentario

    • Carefully disconnect the speaker from the motherboard. Slowly wiggling the connection makes it easier to disconnect.

    Agregar Comentario

    • Using a plastic opening tool, wedge the speaker away from the device. The speaker is glued to the case so use force and leverage.

    Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Timothy

Miembro Desde 26/01/12

41 Reputación

3 Guías creadas

Equipo

Cal Poly, Team 9-3, Regan Winter 2012 Miembro de Cal Poly, Team 9-3, Regan Winter 2012

CPSU-REGAN-W12S9G3

5 Miembros

4 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 1

Últimos 30 Días: 6

Todo El Tiempo: 3,708