Introducción

If your power button is defective, replace the old one with the new power button.

Remove the barcode sticker at the bottom of the device.
  • Remove the barcode sticker at the bottom of the device.

Agregar Comentario

Remove two 8.4 mm T5 screws from the bottom of the device.
  • Remove two 8.4 mm T5 screws from the bottom of the device.

Agregar Comentario

  • Using a plastic opening tool, carefully pry open the device.

  • Open the device carefully, making sure not to damage the gold ribbon cable that connects the screen to the motherboard.

turn the unit around

Andrew Hayden - Contestar

Since there is no replacement speaker whats the point of this process?

greg - Contestar

Very detailed set of instructions! Does anyone known the thread size of the screws in step 2? 8.4 mm T5 screws: is the length of the screw (8.4 mm) ,and the head specification (T5- size of screw driver). I need the actual thread specification. I lost one of the screws and the other one 's head is stripped. I need to replace both screws.

Harold Schultz - Contestar

  • Remove the power button.

Where can I buy the button

milosvalek - Contestar

Conclusión

To reassemble your device, follow these instructions in reverse order.

Timothy

Miembro Desde 26/01/12

35 Reputación

3 Guías creadas

Equipo

Cal Poly, Team 9-3, Regan Winter 2012 Miembro de Cal Poly, Team 9-3, Regan Winter 2012

CPSU-REGAN-W12S9G3

5 Miembros

4 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 5

Últimos 30 Días: 20

Todo El Tiempo: 9,083