Saltar al contenido principal

Garmin Nuvi 2557LMT Battery Replacement

Qué necesitas

  1. Garmin Nuvi 2557LMT Battery Replacement, Garmin Nuvi 2557LMT Disassembly: paso 1, imagen 1 de 1
    • Using a T5 Torx screwdriver, remove four 6 mm screws from the four corners of the back of the device.

  2. Garmin Nuvi 2557LMT Battery Replacement: paso 2, imagen 1 de 1
    • Grip the device with your hands. Using your thumbs pull the nameplate towards yourself and off the device.

  3. Garmin Nuvi 2557LMT Battery Replacement: paso 3, imagen 1 de 1
    • There is a visible separation between the front and the back of the device.

    • Using a plastic opening tool, pry open the device along this separation.

    • Trying to open the device on the opposite side will rip the motherboard-display connector.

  4. Garmin Nuvi 2557LMT Battery Replacement: paso 4, imagen 1 de 2 Garmin Nuvi 2557LMT Battery Replacement: paso 4, imagen 2 de 2
    • Carefully pull apart the device by opening it up on the opposite side of the nameplate.

  5. Garmin Nuvi 2557LMT Battery Replacement, Battery: paso 5, imagen 1 de 1
    • Using a plastic opening tool pry the battery away from the device.

    • The battery might be glued, so it might require a little bit of force to get it out.

  6. Garmin Nuvi 2557LMT Battery Replacement: paso 6, imagen 1 de 1
    • Pull the battery-motherboard connector away from the motherboard.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

2 comentarios

On my Nuvi 2557, the silver name bezel is part of the front cover - it does not separate. I just split the case as shown.

The battery connector pulls out perpendicular to the pc board, and you re-insert it by aligning and pressing down against the board.

john horn - Contestar

Would this apply to the Nuvi 2555LMT?

Bill Hines - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 5

Todo El Tiempo: 1,203