Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Peel off the sticker from the bottom of the device to reveal two screws.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Insert a plastic opening tool in the gap between the front and rear casing.
-
Carefully work the tool around the gap, separating the two halves of the case.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Unscrew the two screws on opposite sides of the speaker using the #00 Phillips screwdriver.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Pull the cable out to detach the speaker from the logic board.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Wedge the iPod opener into the space between the speaker and the case.
-
Apply pressure to pry the speaker away from the case.
-
Cancelar: No complete esta guía.
3 personas más completaron esta guía.
2 comentarios
just a note i had a problem with the speaker in my nuvi 200 an upon opening up found speaker plug had come loose i guess from being dropped a few times pushed plug in an works fine please check all connections before replacing your speaker saved me $$ thanks for a great site everyone...