Garmin Nüvi 370 Battery Replacement

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Introducción

In this guide the repairer replaces the battery of the device by disassembling it to expose the motherboard, which in turn allows access to the battery.

Prerequisite Guide:

Disassembling Garmin Nuvi 370 Into Core Components

Tools Used:

Fine Point Tweezers
Spudger

Estimated Duration: 10 minutes

Qué necesitas

Paso 1 Battery

Garmin Nüvi 370 Battery Replacement, Battery: paso 1, imagen 1 de 1

After following the instructions in the main dis-assembly guide, you should have the screen detached from the motherboard.

Traducir

Paso 2

Garmin Nüvi 370 Battery Replacement: paso 2, imagen 3 de 3

Use the tweezers or the spudger to lift the tan latch off the ribbon cable (ZIF connector)and gently pull out the ZIF connector and cable from underneath the opened latch.

Traducir

Paso 3

The motherboard will now freely separate from the back casing; lay it flat next to the housing.

Traducir

Paso 4

Disconnect the speaker and battery from their terminals on the motherboard. This should disconnect the motherboard completely from the back panel.
It is recommended that you use tweezers or the spudger for precision.

Traducir