Saltar al contenido principal

Garmin Nüvi 205W LCD Display Replacement

Qué necesitas

  1. Garmin Nüvi 205W LCD Display Replacement, LCD Display: paso 1, imagen 1 de 3 Garmin Nüvi 205W LCD Display Replacement, LCD Display: paso 1, imagen 2 de 3 Garmin Nüvi 205W LCD Display Replacement, LCD Display: paso 1, imagen 3 de 3
    • The cracked screen is clearly visible. LCD is still functioning, but obviously no touch function.

    • Remove the holder as well as the power cord from the back of the GPS unit.

    • The Nüvi uses two screws that are hidden underneath the label on the bottom.

  2. Garmin Nüvi 205W LCD Display Replacement: paso 2, imagen 1 de 3 Garmin Nüvi 205W LCD Display Replacement: paso 2, imagen 2 de 3 Garmin Nüvi 205W LCD Display Replacement: paso 2, imagen 3 de 3
    • Remove the label, then remove the two Torx T5 screws

    • Use a plastic opening tool to start splitting the front and back case.

    • Work your way around the separation line, gently applying continous pressure to the back case.

  3. Garmin Nüvi 205W LCD Display Replacement: paso 3, imagen 1 de 3 Garmin Nüvi 205W LCD Display Replacement: paso 3, imagen 2 de 3 Garmin Nüvi 205W LCD Display Replacement: paso 3, imagen 3 de 3
    • Once the front and back case are split, do not yet totally remove it. The LCD is still attached via a ribbon cable.

    • The ribbon cable and connector are covered with a strip of Kapton tape

    • Remove the tape. Use the plastic opening tool, or any other appropriate tool (i.e. guitar pick, fingernails etc), to remove the tape.

  4. Garmin Nüvi 205W LCD Display Replacement: paso 4, imagen 1 de 3 Garmin Nüvi 205W LCD Display Replacement: paso 4, imagen 2 de 3 Garmin Nüvi 205W LCD Display Replacement: paso 4, imagen 3 de 3
    • Once the tape is removed, flip the white clasp open, by moving it away from the cable end, disconnect the LCD.

    • Remove the On/Off switch

    • Remove the complete front assembly.

  5. Garmin Nüvi 205W LCD Display Replacement: paso 5, imagen 1 de 3 Garmin Nüvi 205W LCD Display Replacement: paso 5, imagen 2 de 3 Garmin Nüvi 205W LCD Display Replacement: paso 5, imagen 3 de 3
    • The LCD assembly is held in the front bezel by seven plastic tabs.

    • Move those tabs slightly back while applying pressure from the opposite side (front of the LCD)

    • Continue to push the tabs on the bezel away from the LCD assembly, pushing the LCD away from the bezel

  6. Garmin Nüvi 205W LCD Display Replacement: paso 6, imagen 1 de 3 Garmin Nüvi 205W LCD Display Replacement: paso 6, imagen 2 de 3 Garmin Nüvi 205W LCD Display Replacement: paso 6, imagen 3 de 3
    • Ensure that the LCD assembly clears all the tabs.

    • Remove the LCD from the front bezel

    • Totally separate the assembly from the bezel. Now it is time to replace it with a new assembly.

Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

oldturkey03

Miembro Desde 09/29/10

778,255 Reputación

118 Guías creadas

Equipo

Global Fixers Miembro de Global Fixers

Community

31 Miembros

520 Guías creadas

2 comentarios

After reinstalling LCD screen how do I reconnect the ribbon cable? Any tips would be GREATLY appreciated :) Thank You

John - Contestar

Thank you! Saved me a new GPS!

worthless0000 - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 4

Todo El Tiempo: 3,337