Saltar al contenido principal

Garmin Forerunner 25 Screen Replacement

Qué necesitas

  1. Garmin Forerunner 25 Screen Replacement, Battery: paso 1, imagen 1 de 1
    • Power off your watch before disassembling it.

    • Place the watch on a hard surface with the screen facing down.

    • Unscrew the four 7.0 mm screws located at each corner using a T5 screwdriver.

  2. Garmin Forerunner 25 Screen Replacement: paso 2, imagen 1 de 1
    • Pry the old battery out using a plastic spudger.

  3. Garmin Forerunner 25 Screen Replacement, Motherboard: paso 3, imagen 1 de 1
    • Unscrew the two T4 6 mm screws located on both sides of the motherboard.

  4. Garmin Forerunner 25 Screen Replacement: paso 4, imagen 1 de 1
    • Lift the motherboard up using a plastic spudger.

    • Ribbon cables are still attached underneath—be careful when prying the motherboard up.

  5. Garmin Forerunner 25 Screen Replacement: paso 5, imagen 1 de 1
    • Flip the ZIF connectors using a plastic spudger tool.

    • Remove the motherboard.

  6. Garmin Forerunner 25 Screen Replacement, Screen: paso 6, imagen 1 de 1
    • Remove gold piece in the corner using the pointed side of the 4 spudger.

    • Any spudger with a pointed end should work to remove this piece.

  7. Garmin Forerunner 25 Screen Replacement: paso 7, imagen 1 de 1
    • Pry the screen up with a plastic opening tool.

    • Any plastic tool with a flat edge should work to remove the screen.

    • Remove the screen.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Suzanne Drumm

Miembro Desde 03/21/18

85 Reputación

1 Guía escrita

Equipo

IUPUI, Team S5-G3, Baechle Spring 2018 Miembro de IUPUI, Team S5-G3, Baechle Spring 2018

IUPUI-BAECHLE-S18S5G3

3 Miembros

5 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 8

Ultimos 30 días: 11

Todo El Tiempo: 1,679