Introducción

The screen is a vital component to a digital smart watch. With the right tools, replacing the screen can be done efficiently and effectively.

  1. Power off your watch before disassembling it.
    • Power off your watch before disassembling it.

    • Place the watch on a hard surface with the screen facing down.

    • Unscrew the four 7.0 mm screws located at each corner using a T5 screwdriver.

  2. Pry the old battery out using a plastic spudger.
    • Pry the old battery out using a plastic spudger.

  3. Unscrew the two T4 6 mm screws located on both sides of the motherboard.
    • Unscrew the two T4 6 mm screws located on both sides of the motherboard.

  4. ¡Envío gratuito para todos los pedidos de más de USD100 o que contengan un Pro Tech Toolkit!

    Visita Nuestra Tienda
  5. Lift the motherboard up using a plastic spudger.
    • Lift the motherboard up using a plastic spudger.

    • Ribbon cables are still attached underneath—be careful when prying the motherboard up.

  6. Flip the ZIF connectors using a plastic spudger tool.
    • Flip the ZIF connectors using a plastic spudger tool.

    • Remove the motherboard.

  7. Remove gold piece in the corner using the pointed side of the 4 spudger.
    • Remove gold piece in the corner using the pointed side of the 4 spudger.

    • Any spudger with a pointed end should work to remove this piece.

  8. Pry the screen up with a plastic opening tool.
    • Pry the screen up with a plastic opening tool.

    • Any plastic tool with a flat edge should work to remove the screen.

    • Remove the screen.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Suzanne Drumm

Miembro Desde 21/03/18

85 Reputación

1 Guía escrita

Equipo

IUPUI, Team S5-G3, Baechle Spring 2018 Miembro de IUPUI, Team S5-G3, Baechle Spring 2018

IUPUI-BAECHLE-S18S5G3

3 Miembros

3 Guías creadas

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 6

Últimos 30 Días: 20

Todo El Tiempo: 252