Esta versión puede contener ediciones incorrectas. Cambiar a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a T6 screwdriver to remove the five 1.7 mm screws from the watch face.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use a spudger to lift up and free the screen ribbon cable's press-fit connector from the motherboard.
-
Cancelar: No complete esta guía.
4 personas más completaron esta guía.
3 comentarios
Thanks Adam. How do you chgange the glass in a Fenix 3? I can strip the watch down as you have described but not sure how to replace the screen.
I have the same question.