Repara tus cosas Comunidad Tienda

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Garmin Fenix 3 Display Assembly Replacement

Introducción

If your watch face is damaged, cracked, or chipped, you can learn how to replace it using this guide. This guide involves simply unscrewing screws from the watch face and carefully disconnecting the screen’s ribbon cable from the motherboard. You will need a T6 Torx screwdriver and a spudger.

Qué necesitas

  1. Garmin Fenix 3 Display Assembly Replacement, Display Assembly: paso 1, imagen 1 de 2 Garmin Fenix 3 Display Assembly Replacement, Display Assembly: paso 1, imagen 2 de 2

    • Use a T6 screwdriver to remove the five 1.7 mm screws from the watch face.

    Traducir

  2. Garmin Fenix 3 Display Assembly Replacement: paso 2, imagen 1 de 1

    • Carefully lift the face off the watch base.

    • Do not yank the face. A ribbon connector connects the face and the motherboard, and yanking could result in damage to the motherboard or ribbon.

    Traducir

  4. Garmin Fenix 3 Display Assembly Replacement: paso 3, imagen 1 de 1

    • Use a spudger to lift up and free the screen ribbon cable's press-fit connector from the motherboard.

    Traducir

  5. Garmin Fenix 3 Display Assembly Replacement: paso 4, imagen 1 de 1

    • Set the watch face aside.

    Traducir

    Hi can i replace only lcd because my sapphire glass is ok

    Drazen Popadic - Contestar

Conclusión

To reassemble your device, follow these instructions in reverse order.

4 personas más completaron esta guía.

3 comentarios

Thanks Adam. How do you chgange the glass in a Fenix 3? I can strip the watch down as you have described but not sure how to replace the screen.

Richard Davies-Cooke - Contestar

I have the same question.

Nicolas Chartier -

How do you make sure ribbon connector is aligned correctly

Steven - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 2

Ultimos 7 días: 8

Ultimos 30 días: 35

Todo El Tiempo: 9,119