Saltar al contenido principal

Introducción

You will be removing the existing straps on the watch in order to replace a damaged strap or simply to put a new style of strap on. The tools you will need for this fix is a Torx T9 screwdriver.

Partes

No se especificaron partes.

  1. Grab your Garmin watch and flip it over to get a good view of the four screws that connect the straps to the housing.
    • Grab your Garmin watch and flip it over to get a good view of the four screws that connect the straps to the housing.

  2. Use a Torx T9 screwdriver to remove the four .8mm screws. Once the screws are removed the watch straps should fall out of the housing.
    • Use a Torx T9 screwdriver to remove the four .8mm screws. Once the screws are removed the watch straps should fall out of the housing.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Brandon Barger

Miembro Desde 13/02/16

1,147 Reputación

5 Guías creadas

Equipo

IUPUI, Team 54-4, Wilson Spring 2016 Miembro de IUPUI, Team 54-4, Wilson Spring 2016

IUPUI-WILSON-S16S54G4

3 Miembros

5 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 13

Todo El Tiempo: 3,337