Repara tus cosas Comunidad Tienda

Garmin Drive 52 and Traffic Motherboard Replacement

Introducción

This is the guide to replace the motherboard of the Garmin Drive 52 and Traffic.

Qué necesitas

  1. Garmin Drive 52 and Traffic Motherboard Replacement, Motherboard: paso 1, imagen 1 de 3 Garmin Drive 52 and Traffic Motherboard Replacement, Motherboard: paso 1, imagen 2 de 3 Garmin Drive 52 and Traffic Motherboard Replacement, Motherboard: paso 1, imagen 3 de 3

    • Pop the suction cup off of the device.

    • Unscrew the four T5 Torx screws on the back.

    • Carefully pry apart the front and back with a Jimmy.

    Editar

  3. Garmin Drive 52 and Traffic Motherboard Replacement: paso 2, imagen 1 de 1

    • With the top in hand, carefully apply pressure on the top of the screen to pop it out of the front of the case.

    Editar

  4. Garmin Drive 52 and Traffic Motherboard Replacement: paso 3, imagen 1 de 2 Garmin Drive 52 and Traffic Motherboard Replacement: paso 3, imagen 2 de 2

    • Remove the four Torx T5 screws.

    • Unplug the two connectors from the motherboard and lift it up and out.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 3 otros colaboradores

Jason Wilson

Miembro Desde 10/26/22

388 Reputación

4 Guías creadas

Insignias: 6

+ 3 más insignias

Equipo

UMass Dartmouth, Team 1-2, Petersen Fall 2022 Miembro de UMass Dartmouth, Team 1-2, Petersen Fall 2022

UMASSD-PETERSEN-F22S1G2

6 Miembros

4 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 6

Todo El Tiempo: 161