Qué necesitas
-
-
Use a the end of a flat screwdriver, lever out the cover and put it aside.
-
-
-
-
Insert a small flat end screw driver into the notch of the central axis.
-
Tightly hold in place the screwdriver with one hand and spin the plate with the other. The bolt is held in the plastic plate and will unscrew with it.
-
To reassemble your device, follow the instructions in reverse order.
To reassemble your device, follow the instructions in reverse order.
Cancelar: No complete esta guía.
3 personas más completaron esta guía.
Un agradecimiento especial a estos traductores:
100%
Estos traductores nos están ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›