Saltar al contenido principal

Fix Your Stuff

Right to Repair

Parts & Tools

Partes

No se especificaron partes.

  1. Unscrew the three visible screws, surrounded  in red in picture.
    • Unscrew the three visible screws, surrounded in red in picture.

  2. Remove the two black covers. Frankly, there is no click system.
    • Remove the two black covers. Frankly, there is no click system.

  3. Remove black protection against grass. Do that by rotating it. Rotation is blocked at two places that you can press with a thin screwdriver.
    • Remove black protection against grass. Do that by rotating it. Rotation is blocked at two places that you can press with a thin screwdriver.

  4. Remove the 6 screws now visible in the blue part. Open it in two parts. Remove the 6 screws now visible in the blue part. Open it in two parts. Remove the 6 screws now visible in the blue part. Open it in two parts.
    • Remove the 6 screws now visible in the blue part. Open it in two parts.

  5. Pull out white block and engine. Then split white block in two by  pulling at the arrow place on provided picture.
    • Pull out white block and engine. Then split white block in two by pulling at the arrow place on provided picture.

  6. Clean, fix and re-protect damaged connector.
    • Clean, fix and re-protect damaged connector.

Conclusión

In order to reassemble your device, please follow instructions in reverse order

Una persona más ha completado esta guía.

Un agradecimiento especial a estos traductores:

100%

Estos traductores nos están ayudando a reparar el mundo! ¿Quieres contribuir?
Empezar a traducir ›

Bossard Nicolas

Miembro Desde 21/09/18

137 Reputación

4 Guías creadas

Thanks a lot! My trimmer had the exact same problem.

trrttsch - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 2

Ultimos 30 días: 3

Todo El Tiempo: 97