Repara tus cosas Comunidad Tienda

GameStop GS3 GameCube Controller Motherboard Replacement

Qué necesitas

  1. GameStop GS3 GameCube Controller Motherboard Replacement, Motherboard: paso 1, imagen 1 de 2 GameStop GS3 GameCube Controller Motherboard Replacement, Motherboard: paso 1, imagen 2 de 2

    • Open the controller by unscrewing the screws located on the back panel

    • Separate the two halves of the controller.

    Traducir

  3. GameStop GS3 GameCube Controller Motherboard Replacement: paso 2, imagen 1 de 3 GameStop GS3 GameCube Controller Motherboard Replacement: paso 2, imagen 2 de 3 GameStop GS3 GameCube Controller Motherboard Replacement: paso 2, imagen 3 de 3

    • Remove the rumble-pack by unscrewing the screws located on on either side.

    • Remove the rumble pack to fully separate the two halves of the controller

    Traducir

  4. GameStop GS3 GameCube Controller Motherboard Replacement: paso 3, imagen 1 de 3 GameStop GS3 GameCube Controller Motherboard Replacement: paso 3, imagen 2 de 3 GameStop GS3 GameCube Controller Motherboard Replacement: paso 3, imagen 3 de 3

    • Disconnect the motherboard from the front half of the controller by unscrewing the small screws around its perimeter.

    • The motherboard should separate and lift right out from the front half.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 2 otros colaboradores

John Harrison

Miembro Desde 10/28/16

213 Reputación

2 Guías creadas

Insignias: 5

+ 2 más insignias

Equipo

UMass Dartmouth, Team 3-5, Isaacson Fall 2016 Miembro de UMass Dartmouth, Team 3-5, Isaacson Fall 2016

UMASSD-ISAACSON-F16S3G5

3 Miembros

10 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 2

Ultimos 30 días: 14

Todo El Tiempo: 632