Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Place the plastic opening tool into the SD card slot or charge port.
-
Try in an upward motion until you see a separation between the tablet and back cover.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Work around the entire device by sliding the plastic opening tool around the rim.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the back cover once all links have been separated.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using tweezers, peel back the green tape from the ZIF connectors on the two black ribbon cables.
-
Use a plastic opening tool to lift up the plastic clips on the ZIF connectors.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the six 2mm screws Phillips #000 screws surrounding the battery.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Place the plastic opening tool between the frame and battery.
-
Move the plastic opening tool in a downward motion, away from the battery to bring the battery out of the device.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Hold the battery and disconnect the plug to remove the battery.
-
Cancelar: No complete esta guía.
82 personas más completaron esta guía.
19 comentarios
where is a good place to buy a replacement battery?
Artículo muy positivo: pasos muy bien detallados. Me ha resultado fácil la el cambio de batería. Gracias por tu colaboración.
Bought mine off of ebay