Repara tus cosas Comunidad Tienda

GM Key Fob Plastic Housing Replacement

Introducción

This purpose of this guide is to provide clear instructions for replacing the plastic housing for a GM Key Fob. Replacing just the housing, instead of the entire Fob, can save the individual a significant amount of money in addition to reducing environmental and electrical waste.

Qué necesitas

  1. GM Key Fob Plastic Housing Replacement, Key Fob Plastic Housing: paso 1, imagen 1 de 1

    • Pry apart the key ring to remove it from the old housing.

    Editar

  2. GM Key Fob Plastic Housing Replacement: paso 2, imagen 1 de 3 GM Key Fob Plastic Housing Replacement: paso 2, imagen 2 de 3 GM Key Fob Plastic Housing Replacement: paso 2, imagen 3 de 3

    • Once you have removed the key ring, use it to open the housing by wedging it into the groove, as pictured.

    Editar

  4. GM Key Fob Plastic Housing Replacement: paso 3, imagen 1 de 2 GM Key Fob Plastic Housing Replacement: paso 3, imagen 2 de 2

    • Remove the electrical board and rubber key pad from the old housing.

    Editar

  5. GM Key Fob Plastic Housing Replacement: paso 4, imagen 1 de 2 GM Key Fob Plastic Housing Replacement: paso 4, imagen 2 de 2

    • Remove the electrical board from the rubber key pad.

    Editar

  6. GM Key Fob Plastic Housing Replacement: paso 5, imagen 1 de 2 GM Key Fob Plastic Housing Replacement: paso 5, imagen 2 de 2

    • If necessary, remove the battery from the electrical board and replace it.

    Editar

  7. GM Key Fob Plastic Housing Replacement: paso 6, imagen 1 de 1

    • After Opening the new Key Fob package, select the correct housing as more than one model is included.

    Editar
Conclusión

To reassemble your device, simply follow these disassembly instructions in reverse order.

Una persona más ha completado esta guía.

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 4

Ultimos 7 días: 11

Ultimos 30 días: 31

Todo El Tiempo: 2,464