Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Find the battery compartment on the bottom of the clock radio.
-
Using your thumb, push the compartment cover latch toward the battery.
-
With the latch pushed in, pull the compartment cover upward to remove it..
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Lift the battery from the compartment.
-
Pull the battery up and gently disconnect it from the battery connector.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using a Phillips #00 Screwdriver, unscrew the six 12mm screws from around the bottom of the clock radio.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Gently pull the liquid crystal display (LCD) cover off.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Lift the top off. Two gray, plastic internal pieces will fall out when you do this; set them aside.
-
Cancelar: No complete esta guía.
2 personas más completaron esta guía.