Repara tus cosas Comunidad Tienda

G-Wolves Hati Paracord Replacement

Introducción

This guide is used to replace or swap the cord/paracord on the G-Wolves Hati mouse.

The paracord is the wire which connects the mouse to the computer and allows the mouse to function and guide the cursor. It is a lighter form of cable which is used in gaming mice in order to alleviate the feeling of having a cable attached to a mouse. With a faulty paracord, the mouse sensor could not only be stuttering, but there is a chance the entire mouse will disconnect or not function whatsoever (even if the rest of the components are all in working condition).

Steps 2 and 3 involve removing mouse skates from the feet. Be careful not to create, bend, or fold lines on these feet as they will be felt when moving the mouse. Peel them slowly.

Make sure to have the mouse disconnected before beginning the guide.

Qué necesitas

  1. G-Wolves Hati Paracord Replacement, Mouse Paracord: paso 1, imagen 1 de 1

    • Flip your mouse upside down.

    Editar

  2. G-Wolves Hati Paracord Replacement: paso 2, imagen 1 de 3 G-Wolves Hati Paracord Replacement: paso 2, imagen 2 de 3 G-Wolves Hati Paracord Replacement: paso 2, imagen 3 de 3

    • Peel off the back right mouse skate.

    • Peel slowly, you don't want to create bends on your skate.

    Editar

  3. G-Wolves Hati Paracord Replacement: paso 3, imagen 1 de 3 G-Wolves Hati Paracord Replacement: paso 3, imagen 2 de 3 G-Wolves Hati Paracord Replacement: paso 3, imagen 3 de 3

    • Peel off the back left mouse skate.

    • Peel slowly, you don't want to create bends on your skate.

    Editar

  4. G-Wolves Hati Paracord Replacement: paso 4, imagen 1 de 3 G-Wolves Hati Paracord Replacement: paso 4, imagen 2 de 3 G-Wolves Hati Paracord Replacement: paso 4, imagen 3 de 3

    • Unscrew both of the uncovered screws.

    • 6.4mm Phillips-head screws.

    Editar

  5. G-Wolves Hati Paracord Replacement: paso 5, imagen 1 de 2 G-Wolves Hati Paracord Replacement: paso 5, imagen 2 de 2

    • Squeeze the mouse under second mouse button until the bottom opens.

    Editar

  6. G-Wolves Hati Paracord Replacement: paso 6, imagen 1 de 2 G-Wolves Hati Paracord Replacement: paso 6, imagen 2 de 2

    • Pull the bottom piece towards the back of the mouse and upwards to remove it.

    • Pull carefully there is a ribbon cable still connected.

    Editar

  7. G-Wolves Hati Paracord Replacement: paso 7, imagen 1 de 2 G-Wolves Hati Paracord Replacement: paso 7, imagen 2 de 2

    • Remove the ribbon cable connecting the bottom piece to the upper piece.

    Editar

  9. G-Wolves Hati Paracord Replacement: paso 8, imagen 1 de 2 G-Wolves Hati Paracord Replacement: paso 8, imagen 2 de 2

    • Unscrew the following screws:

    • 4.8 mm Phillips-head screws.

    Editar

  10. G-Wolves Hati Paracord Replacement: paso 9, imagen 1 de 2 G-Wolves Hati Paracord Replacement: paso 9, imagen 2 de 2

    • Flip the bottom piece upside down.

    • Pull the circuit board off without pulling on the cable.

    Editar

  11. G-Wolves Hati Paracord Replacement: paso 10, imagen 1 de 3 G-Wolves Hati Paracord Replacement: paso 10, imagen 2 de 3 G-Wolves Hati Paracord Replacement: paso 10, imagen 3 de 3

    • Grab the side ridges and remove the connection.

    • Do not wiggle till slightly removed to not bend pins.

    Editar

  12. G-Wolves Hati Paracord Replacement: paso 11, imagen 1 de 2 G-Wolves Hati Paracord Replacement: paso 11, imagen 2 de 2

    • Pop off the paracord from the bottom piece.

    Editar

  13. G-Wolves Hati Paracord Replacement: paso 12, imagen 1 de 2 G-Wolves Hati Paracord Replacement: paso 12, imagen 2 de 2

    • Press in the new paracord.

    Editar

  14. G-Wolves Hati Paracord Replacement: paso 13, imagen 1 de 3 G-Wolves Hati Paracord Replacement: paso 13, imagen 2 de 3 G-Wolves Hati Paracord Replacement: paso 13, imagen 3 de 3

    • Rearrange wires to follow the guide ridges.

    Editar

  15. G-Wolves Hati Paracord Replacement: paso 14, imagen 1 de 2 G-Wolves Hati Paracord Replacement: paso 14, imagen 2 de 2

    • Re-insert the circuit board by lining up the scroll wheel with the front piece and pressing down.

    Editar

  16. G-Wolves Hati Paracord Replacement: paso 15, imagen 1 de 2 G-Wolves Hati Paracord Replacement: paso 15, imagen 2 de 2

    • Re-insert the screws.

    • 4.8 mm Phillips-head screws.

    Editar

  17. G-Wolves Hati Paracord Replacement: paso 16, imagen 1 de 2 G-Wolves Hati Paracord Replacement: paso 16, imagen 2 de 2

    • Thread the wire through the side opening.

    • Insert the paracord connection.

    Editar

  18. G-Wolves Hati Paracord Replacement: paso 17, imagen 1 de 2 G-Wolves Hati Paracord Replacement: paso 17, imagen 2 de 2

    • Insert the ribbon cable.

    • Cable is located on the upper mouse piece.

    Editar

  19. G-Wolves Hati Paracord Replacement: paso 18, imagen 1 de 3 G-Wolves Hati Paracord Replacement: paso 18, imagen 2 de 3 G-Wolves Hati Paracord Replacement: paso 18, imagen 3 de 3

    • Hover the bottom piece over the upper piece flipped over.

    • Press the bottom piece down and forward till under clip pieces.

    • Press down where skates where removed till there is a click.

    Editar

  20. G-Wolves Hati Paracord Replacement: paso 19, imagen 1 de 2 G-Wolves Hati Paracord Replacement: paso 19, imagen 2 de 2

    • Insert the screws.

    • 6.4mm Phillips Head Screws.

    Editar

  21. G-Wolves Hati Paracord Replacement: paso 20, imagen 1 de 3 G-Wolves Hati Paracord Replacement: paso 20, imagen 2 de 3 G-Wolves Hati Paracord Replacement: paso 20, imagen 3 de 3

    • Press on the skates.

    Editar
Linea de Meta

Autor

con 2 otros colaboradores

Ayaan

Miembro Desde 10/23/23

301 Reputación

1 Guía escrita

Insignias: 3

Equipo

CSU Los Angeles, Team 5-11, Kershman Fall 2023 Miembro de CSU Los Angeles, Team 5-11, Kershman Fall 2023

CSULA-KERSHMAN-F23S5G11

1 Miembro

1 Guía escrita

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 7

Ultimos 30 días: 36

Todo El Tiempo: 176