Fused LED Light Replacement

Introducción

The LED light bulb consists of many small LEDs connected in series. Whenever a single LED gets fused, the circuit is broken and the Light bulb stops functioning, even though most of the LEDs are still in working condition.

Use this guide to repair a fused bulb by easily replacing a fused LED with a new LED and completing the closed circuit through which the current flows again and lights the bulb.

Qué necesitas

Paso 1 Fused LED Light

Fused LED Light Replacement, Fused LED Light: paso 1, imagen 1 de 2

Fused LED Light Replacement, Fused LED Light: paso 1, imagen 2 de 2

Remove the upper semi-sphere diffuser by twisting or applying some heat with a heat gun or dryer to soften the adhesive.

Traducir

Paso 2

Fused LED Light Replacement: paso 2, imagen 3 de 3

Use a battery or a cell with connecting wires and apply them to the exposed solder ends on each LED.
The LED which doesn't lights up is detected as the faulty LED.

Traducir

Paso 3

Using a knife or screwdriver, remove the faulty LED.
We need to replace it with a similar LED or a resistor.
Connecting the terminals directly can result in an increased current and multiple LED failure.