Saltar al contenido principal

Introducción

This guide doesn't require you to remove the back panel. The parts in the base are relatively small so we suggest having a way to keep track of them. Cleaning is at your discretion although we recommend a mild detergent/dish soap.

Partes

No se especificaron partes.

  1. Flip Furby upside down so his feet are pointed towards you. Unscrew the right and left screws on the base. Unscrew the right and left screws on the base.
    • Flip Furby upside down so his feet are pointed towards you.

    • Unscrew the right and left screws on the base.

  2. Remove the base from your Furby. Flip over the base  so the screws are on the right and left. Unscrew the 2 right and 2 left inside screws.
    • Remove the base from your Furby.

    • Flip over the base so the screws are on the right and left.

    • Unscrew the 2 right and 2 left inside screws.

  3. Lift the housing for the foot components. Rotate the base 90 degrees. Locate all four of the foot activation levers. Remove them one by one from the base.
    • Lift the housing for the foot components.

    • Rotate the base 90 degrees.

    • Locate all four of the foot activation levers. Remove them one by one from the base.

  4. Locate the feet pieces and remove them. Locate the feet pieces and remove them.
    • Locate the feet pieces and remove them.

  5. Locate and gently lift out the four small springs using tweezers. Now that you have all parts are removed, they can be cleaned and reassembled into Furby's "feet". Now that you have all parts are removed, they can be cleaned and reassembled into Furby's "feet".
    • Locate and gently lift out the four small springs using tweezers.

    • Now that you have all parts are removed, they can be cleaned and reassembled into Furby's "feet".

Conclusión

To reassemble your device, follow these instructions in reverse order.

Equipo

Cal Poly, Team 15-5, Livingston Fall 2016 Miembro de Cal Poly, Team 15-5, Livingston Fall 2016

CPSU-LIVINGSTON-F16S15G5

4 Miembros

6 Guías creadas

I greet my furby boom 2012 he falls asleep and when I wake him up he starts to cry and then he falls asleep. This started after a week without using.What I can do,Thanks for your help.Juan

jrrabrito - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 2

Ultimos 30 días: 11

Todo El Tiempo: 850