Repara tus cosas

Derecho a reparar

Tienda

Fujitsu M2011 Hard Drive Replacement

Escrito Por: Brandon Stowers (y 2 de otros participantes)
  • Comentarios: 0
  • Favoritos: 0

Dificultad

Fácil

Pasos

6

Tiempo Requerido

3 minutos

Secciones

2

Banderas

0

Introducción

The tools you will need to replace the hard drive will be a Phillips screw driver. This repair may be required if your computer is running slow, or you have received an error for hard drive corruption.

Herramientas

Comprar estas herramientas

Partes

No se especificaron partes.

  1. Slide switch #1 (shown) to the left. Slide switch #1 (shown) to the left.

    • Slide switch #1 (shown) to the left.

    Editar

  2. Slide switch #2 (shown) to the right and hold. Slide switch #2 (shown) to the right and hold.

    • Slide switch #2 (shown) to the right and hold.

    Editar

  4. Pull the battery straight back out.

    • Pull the battery straight back out.

    Editar

  5. Remove the two 3 mm PH0 screws holding hard drive in place. Remove the two 3 mm PH0 screws holding hard drive in place.

    • Remove the two 3 mm PH0 screws holding hard drive in place.

    Editar

  6. Unfold the black tab attached to hard drive.

    • Unfold the black tab attached to hard drive.

    Editar

  7. Remove the hard drive by pulling the black tab.

    • Remove the hard drive by pulling the black tab.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 2 otros colaboradores

Brandon Stowers

Miembro Desde 05/11/18

97 Reputación

1 Guía escrita

Insignias: 2

Equipo

IUPUI, Team S2-G5, Baechle Fall 2018 Miembro de IUPUI, Team S2-G5, Baechle Fall 2018

IUPUI-BAECHLE-F18S2G5

3 Miembros

6 Guías creadas

0 comentarios

Agregar un comentario

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 3

Todo El Tiempo: 111