Repara tus cosas Comunidad Tienda

Fujitsu Lifebook Stylistic Q584 USB port Replacement

Introducción

We will walk through removal the USB port from the Fujitsu Lifebook Stylistic Q584.

Qué necesitas

  1. Fujitsu Lifebook Stylistic Q584 USB port Replacement, Back Case: paso 1, imagen 1 de 1

    • Remove the white sticker covering the screws (if applicable).

    • Use the PH1 screwdriver to remove the four 2 mm screws from the the backside of the device.

    Editar

  2. Fujitsu Lifebook Stylistic Q584 USB port Replacement: paso 2, imagen 1 de 1

    • Insert the plastic opening tool along the seam of the back case.

    • Gently slide the plastic opening tool along the entire seam popping the clips free.

    Editar

  3. Fujitsu Lifebook Stylistic Q584 USB port Replacement: paso 3, imagen 1 de 1

    • Carefully lift the back case and remove the smartcard ribbon from the motherboard.

    Editar

  4. Fujitsu Lifebook Stylistic Q584 USB port Replacement, Inner Back Shield: paso 4, imagen 1 de 1

    • Remove the ten 3mm screws with a PH00 screwdriver from the shield.

    Editar

  6. Fujitsu Lifebook Stylistic Q584 USB port Replacement: paso 5, imagen 1 de 1

    • Remove the grey docking station port cover.

    Editar

  7. Fujitsu Lifebook Stylistic Q584 USB port Replacement: paso 6, imagen 1 de 1

    • Gently slide the plastic opening tool along the entire seam popping the clips free.

    Editar

  8. Fujitsu Lifebook Stylistic Q584 USB port Replacement: paso 7, imagen 1 de 1

    • Lift the shield away from the device and remove the fingerprint scanner's ribbon from the motherboard.

    Editar

  9. Fujitsu Lifebook Stylistic Q584 USB port Replacement, USB port: paso 8, imagen 1 de 1

    • Remove 2mm screw with a PH1 screwdriver from USB board

    Editar

  10. Fujitsu Lifebook Stylistic Q584 USB port Replacement: paso 9, imagen 1 de 1

    • Disconnect USB periphery ribbon from motherboard

    Editar

  11. Fujitsu Lifebook Stylistic Q584 USB port Replacement: paso 10, imagen 1 de 1

    • Pull USB board up to remove.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 3 otros colaboradores

Spencer Bacon

Miembro Desde 09/21/17

410 Reputación

4 Guías creadas

Insignias: 7

+ 4 más insignias

Equipo

Washington State, Team S1-G3, Phelps-Hillen Fall 2017 Miembro de Washington State, Team S1-G3, Phelps-Hillen Fall 2017

WSU-PHELPS-HILLEN-F17S1G3

5 Miembros

10 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 9

Ultimos 30 días: 16

Todo El Tiempo: 484