Repara tus cosas Comunidad Tienda

Fujitsu Lifebook Stylistic Q584 Camera Replacement

Introducción

If you need to replace the camera this guide will provide step-by-step instructions on how to disassemble and replace your camera.

Qué necesitas

  1. Fujitsu Lifebook Stylistic Q584 Camera Replacement, Back Case: paso 1, imagen 1 de 1

    • Remove the white sticker covering the screws (if applicable).

    • Use the PH1 screwdriver to remove the four 2 mm screws from the the backside of the device.

    Editar

  2. Fujitsu Lifebook Stylistic Q584 Camera Replacement: paso 2, imagen 1 de 1

    • Insert the plastic opening tool along the seam of the back case.

    • Gently slide the plastic opening tool along the entire seam popping the clips free.

    Editar

  3. Fujitsu Lifebook Stylistic Q584 Camera Replacement: paso 3, imagen 1 de 1

    • Carefully lift the back case and remove the smartcard ribbon from the motherboard.

    Editar

  4. Fujitsu Lifebook Stylistic Q584 Camera Replacement, Inner Back Shield: paso 4, imagen 1 de 1

    • Remove the ten 3mm screws with a PH00 screwdriver from the shield.

    Editar

  6. Fujitsu Lifebook Stylistic Q584 Camera Replacement: paso 5, imagen 1 de 1

    • Remove the grey docking station port cover.

    Editar

  7. Fujitsu Lifebook Stylistic Q584 Camera Replacement: paso 6, imagen 1 de 1

    • Gently slide the plastic opening tool along the entire seam popping the clips free.

    Editar

  8. Fujitsu Lifebook Stylistic Q584 Camera Replacement: paso 7, imagen 1 de 1

    • Lift the shield away from the device and remove the fingerprint scanner's ribbon from the motherboard.

    Editar

  9. Fujitsu Lifebook Stylistic Q584 Camera Replacement, Camera: paso 8, imagen 1 de 2 Fujitsu Lifebook Stylistic Q584 Camera Replacement, Camera: paso 8, imagen 2 de 2

    • Pull up the cord that connects the battery to the motherboard

    Editar

  10. Fujitsu Lifebook Stylistic Q584 Camera Replacement: paso 9, imagen 1 de 2 Fujitsu Lifebook Stylistic Q584 Camera Replacement: paso 9, imagen 2 de 2

    • Pull the ribbon straight up from the back of the camera board

    Editar

  11. Fujitsu Lifebook Stylistic Q584 Camera Replacement: paso 10, imagen 1 de 1

    • Remove the single 2mm screw using a PH000 screwdriver from the camera board.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 4 otros colaboradores

Connor Stanton

Miembro Desde 09/21/17

613 Reputación

6 Guías creadas

Insignias: 7

+ 4 más insignias

Equipo

Washington State, Team S1-G3, Phelps-Hillen Fall 2017 Miembro de Washington State, Team S1-G3, Phelps-Hillen Fall 2017

WSU-PHELPS-HILLEN-F17S1G3

5 Miembros

10 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 16

Todo El Tiempo: 288