Fujitsu Lifebook Stylistic Q584 Back Case Replacement

Introducción

The back case is the exterior shell of the device. It needs to be removed in order to access internal components.

Remove the white sticker covering the screws (if applicable).
Use the PH1 screwdriver to remove the four 2 mm screws from the the backside of the device.

Insert the plastic opening tool along the seam of the back case.
Gently slide the plastic opening tool along the entire seam popping the clips free.

Carefully lift the back case and remove the smartcard ribbon from the motherboard.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Miembro Desde 09/21/17

410 Reputación

4 Guías creadas

WSU-PHELPS-HILLEN-F17S1G3

5 Miembros

10 Guías creadas