Introducción

The hinge cover has the computer power button, wireless switch, and volume toggle.

  1. Locate the two clips on the bottom of the computer that support the battery.
    • Locate the two clips on the bottom of the computer that support the battery.

    Agregar Comentario

  2. Using your fingers,  push the clips inward and then upward.
    • Using your fingers, push the clips inward and then upward.

    • Lift the battery out of the computer.

    Agregar Comentario

    • Use a spudger to lift the back of the hinge cover on the left and right sides of the computer.

    Agregar Comentario

    • Lay the computer flat on a stable surface with the monitor pointing away from you.

    Agregar Comentario

    • Use a spudger to partially lift the hinge cover.

    Agregar Comentario

    • The hinge cover has a ribbon cable that is attached to the motherboard. To prevent damage, lift the hinge cover slowly.

    • Lift the hinge cover enough to expose the ribbon cable.

    Agregar Comentario

    • Disconnect the ribbon cable from the motherboard and remove the hinge cover from the computer.

    Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Neil Daniels

Miembro Desde 17/01/11

1,309 Reputación

11 Guías creadas

Equipo

Cal Poly, Team 5-18, Amido Winter 2011 Miembro de Cal Poly, Team 5-18, Amido Winter 2011

CPSU-AMIDO-W11S5G18

3 Miembros

11 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 2

Últimos 30 Días: 8

Todo El Tiempo: 3,018