Saltar al contenido principal

Fujifilm Instax Minion Motor Replacement

Qué necesitas

  1. Fujifilm Instax Minion Motor Replacement, Camera Shell: paso 1, imagen 1 de 3 Fujifilm Instax Minion Motor Replacement, Camera Shell: paso 1, imagen 2 de 3 Fujifilm Instax Minion Motor Replacement, Camera Shell: paso 1, imagen 3 de 3
    • Remove the six 4.5 mm #00 Phillips screws from the bottom, left, and right sides.

  2. Fujifilm Instax Minion Motor Replacement: paso 2, imagen 1 de 3 Fujifilm Instax Minion Motor Replacement: paso 2, imagen 2 de 3 Fujifilm Instax Minion Motor Replacement: paso 2, imagen 3 de 3
    • Use a spudger to remove the film slot guard on the top of the camera.

    • Remove the one 4.5 mm #00 Phillips screw under the slot guard.

  3. Fujifilm Instax Minion Motor Replacement: paso 3, imagen 1 de 3 Fujifilm Instax Minion Motor Replacement: paso 3, imagen 2 de 3 Fujifilm Instax Minion Motor Replacement: paso 3, imagen 3 de 3
    • Press the release tab on the back of the camera to open the film compartment.

    • Remove the film cartridge within this compartment.

  4. Fujifilm Instax Minion Motor Replacement: paso 4, imagen 1 de 3 Fujifilm Instax Minion Motor Replacement: paso 4, imagen 2 de 3 Fujifilm Instax Minion Motor Replacement: paso 4, imagen 3 de 3
    • Press the battery cover in and down to remove it.

    • Remove any batteries within.

  5. Fujifilm Instax Minion Motor Replacement: paso 5, imagen 1 de 3 Fujifilm Instax Minion Motor Replacement: paso 5, imagen 2 de 3 Fujifilm Instax Minion Motor Replacement: paso 5, imagen 3 de 3
    • Use a plastic opening tool to help pry the front and back shells apart.

    • With the camera facing down, remove only the back shell.

  6. Fujifilm Instax Minion Motor Replacement: paso 6, imagen 1 de 3 Fujifilm Instax Minion Motor Replacement: paso 6, imagen 2 de 3 Fujifilm Instax Minion Motor Replacement: paso 6, imagen 3 de 3
    Herramienta utilizada en este paso:
    Tweezers
    $4.99
    Comprar
    • Carefully peel the front side of the shell away.

    • As you lift the front shell, be careful to not pull too hard since there is a spring attached to the shell and the camera body.

    • Using a set of tweezers, detach the spring from the body. The spring will retract into the black and gray ring on the front shell.

  7. Fujifilm Instax Minion Motor Replacement, Motor: paso 7, imagen 1 de 2 Fujifilm Instax Minion Motor Replacement, Motor: paso 7, imagen 2 de 2
    • Remove the four 4.5 mm #00 Phillips screws on the battery compartment.

  8. Fujifilm Instax Minion Motor Replacement: paso 8, imagen 1 de 1
    • Lift up the battery compartment to free up the motor.

  9. Fujifilm Instax Minion Motor Replacement: paso 9, imagen 1 de 1
    • Unscrew the two 2.9mm Phillips #00 screws holding the motor to the frame.

  10. Fujifilm Instax Minion Motor Replacement: paso 10, imagen 1 de 2 Fujifilm Instax Minion Motor Replacement: paso 10, imagen 2 de 2
    • Remove the motor from the frame.

  11. Fujifilm Instax Minion Motor Replacement: paso 11, imagen 1 de 2 Fujifilm Instax Minion Motor Replacement: paso 11, imagen 2 de 2
    • Desolder the wires from the leads of the capacitor.

    • Take note of the connections between the wires and leads for reassembly.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Jeffery

Miembro Desde 03/28/15

220 Reputación

2 Guías creadas

Equipo

Cal Poly, Team S18-G6, Livingston Spring 2018 Miembro de Cal Poly, Team S18-G6, Livingston Spring 2018

CPSU-LIVINGSTON-S18S18G6

4 Miembros

11 Guías creadas

Un comentario

Can anyone help finding a motor for the instax 8 or 9? I can't find one to fit any help appreciated

Jordan Kelly - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 3

Ultimos 7 días: 8

Ultimos 30 días: 29

Todo El Tiempo: 1,370