Saltar al contenido principal

Fujifilm Instax Mini 8 Capacitor Replacement

Qué necesitas

  1. Fujifilm Instax Mini 8 Capacitor Replacement, Capacitor: paso 1, imagen 1 de 3 Fujifilm Instax Mini 8 Capacitor Replacement, Capacitor: paso 1, imagen 2 de 3 Fujifilm Instax Mini 8 Capacitor Replacement, Capacitor: paso 1, imagen 3 de 3
    • First, push in the lens and remove the two AA batteries.

  2. Fujifilm Instax Mini 8 Capacitor Replacement: paso 2, imagen 1 de 2 Fujifilm Instax Mini 8 Capacitor Replacement: paso 2, imagen 2 de 2
    • Open the rear compartment and remove the film cartridge.

  3. Fujifilm Instax Mini 8 Capacitor Replacement: paso 3, imagen 1 de 3 Fujifilm Instax Mini 8 Capacitor Replacement: paso 3, imagen 2 de 3 Fujifilm Instax Mini 8 Capacitor Replacement: paso 3, imagen 3 de 3
    • Remove screws from bottom of camera with a small #00 Phillips Screwdriver. Then remove screws around the camera. Additionally, there are two screws in the battery compartment which also need to be removed.

  4. Fujifilm Instax Mini 8 Capacitor Replacement: paso 4, imagen 1 de 3 Fujifilm Instax Mini 8 Capacitor Replacement: paso 4, imagen 2 de 3 Fujifilm Instax Mini 8 Capacitor Replacement: paso 4, imagen 3 de 3
    • Once all screws are removed, gently pry open the front casing with your hands or plastic opening tools carefully. Do note that there will be a spring that attaches the front casing and the main circuit board, so refrain from allowing excess tension on the spring.

  5. Fujifilm Instax Mini 8 Capacitor Replacement: paso 5, imagen 1 de 3 Fujifilm Instax Mini 8 Capacitor Replacement: paso 5, imagen 2 de 3 Fujifilm Instax Mini 8 Capacitor Replacement: paso 5, imagen 3 de 3
    • Locate the photo-flash capacitor, then find all the connecting wires to the motherboard and battery compartment. Take notes to which exact wires they are to limit mistakes.

  6. Fujifilm Instax Mini 8 Capacitor Replacement: paso 6, imagen 1 de 3 Fujifilm Instax Mini 8 Capacitor Replacement: paso 6, imagen 2 de 3 Fujifilm Instax Mini 8 Capacitor Replacement: paso 6, imagen 3 de 3
    • Carefully pry out the capacitor with a spudger or plastic opening tools.

  7. Fujifilm Instax Mini 8 Capacitor Replacement: paso 7, imagen 1 de 3 Fujifilm Instax Mini 8 Capacitor Replacement: paso 7, imagen 2 de 3 Fujifilm Instax Mini 8 Capacitor Replacement: paso 7, imagen 3 de 3
    • With a solder kit, heat the connecting solder points to open the connection, thus removing the connecting wires. There are many ways to do this, depending on the available tools on hand.

Conclusión

To reassemble your device, follow these instructions in reverse order.

4 personas más completaron esta guía.

Boyang Wu

Miembro Desde 10/02/12

955 Reputación

5 Guías creadas

Equipo

USF Tampa, Team 4-1, Meier Fall 2015 Miembro de USF Tampa, Team 4-1, Meier Fall 2015

USFT-MEIER-F15S4G1

4 Miembros

24 Guías creadas

2 comentarios

Hi There! I need a new capacitor for my daughter's Fuji Instax Mini 9. Do you supply? I am in South Africa.

Kuschi - Contestar

Hi, any recommendations on where can find a shop in Kl Malaysia to fix my instax mini 8? Thanks in advance !

Miss.G - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 5

Ultimos 7 días: 33

Ultimos 30 días: 200

Todo El Tiempo: 24,604