Fujifilm Finepix S1000fd Rear Cover Casing Replacement

Introducción

Before you get started with this procedure, have a place to store screws in an organized fashion. There are many screws involved in this procedure that you don't want to get mixed up.

Qué necesitas

Paso 1 Rear Cover Casing

Fujifilm Finepix S1000fd Rear Cover Casing Replacement, Rear Cover Casing: paso 1, imagen 1 de 2

Fujifilm Finepix S1000fd Rear Cover Casing Replacement, Rear Cover Casing: paso 1, imagen 2 de 2

Use the Phillips PH00 screwdriver to remove all the 0.5mm screws on the side.

Editar

Paso 2

Use the Tri-point Y0 screwdriver to remove the two 0.5mm screws on the horizontal axis.
Remove the other two 0.5mm screws on the bottom with the PH00 screwdriver.

Editar

Paso 3

Once you unscrew all of the screws, carefully remove the rear casing.
Be careful not to pull the rear casing, otherwise you will rip the ribbon cable.
Detach the ribbon cable by lifting the tab on the connector.