Introducción

A guide on how to take out the many screws located on the inside, metal cover and how to install an LCD.

Remove the screws from the bottom of the camera using the tri-wing screwdriver.
  • Remove the screws from the bottom of the camera using the tri-wing screwdriver.

    • Three 5.4 mm tri-head screws.

Agregar Comentario

Remove screws from charger side of camera using the Phillips 00 screwdriver.
  • Remove screws from charger side of camera using the Phillips 00 screwdriver.

    • Two 3.3 mm Phillips #00 screws.

Agregar Comentario

  • Remove screws from wrist-strap side of camera using the Phillips 00 screwdriver.

    • Two 3.3 mm Phillips #00 screws.

Agregar Comentario

  • Separate the front and back casing using the spudger.

  • Gently pull apart the two casings.

  • Pull the back casing away from the camera.

Agregar Comentario

  • Remove screws from the casing covering the LCD using the Phillips 00 screwdriver.

    • Remove the fifteen 2.9 mm Phillips #00 screws.

Agregar Comentario

  • Slide casing out using the spudger.

Agregar Comentario

  • Gently remove the LCD display data cable by gripping the end that is connected to the motherboard and pulling out.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Una persona más ha completado esta guía.

Sarah Looper

Miembro Desde 11/03/13

76 Reputación

7 Guías creadas

Equipo

Clemson, Team 13-4, Benson Spring 2013 Miembro de Clemson, Team 13-4, Benson Spring 2013

CLEM-BENSON-S13S13G4

2 Miembros

8 Guías creadas

Great Guide! Worked great to replace my screen!

Daniel - Contestar

Awesome guide! BEST WORK I'VE EVER SEEN ON A REPAIR GUIDE

Johnston Thayer - Contestar

Shutter button replacement was great too!

Daniel -

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 1

Últimos 7 Días: 1

Últimos 30 Días: 5

Todo El Tiempo: 628