Saltar al contenido principal

Fujifilm FinePix S8630 Flash Lid Spring Replacement

Qué necesitas

  1. Fujifilm FinePix S8630 Flash Lid Spring  Replacement, Battery Door: paso 1, imagen 1 de 1
    • Remove the M3 x 4mm screws from the bottom of your device as indicated by the picture. using the Philips Head J0 Screw Driver Bit .

  2. Fujifilm FinePix S8630 Flash Lid Spring  Replacement: paso 2, imagen 1 de 1
    • Use your Philips Head Screwdriver to remove the M3 x 4mm screws from the left side of the device as indicated by the pictures.

  3. Fujifilm FinePix S8630 Flash Lid Spring  Replacement: paso 3, imagen 1 de 1
    • Use your Philips Head Screwdriver to remove the M3 x 4mm screws from the right side of the device as indicated by the pictures.

  4. Fujifilm FinePix S8630 Flash Lid Spring  Replacement: paso 4, imagen 1 de 2 Fujifilm FinePix S8630 Flash Lid Spring  Replacement: paso 4, imagen 2 de 2
    • Use your Philips Head Screwdriver to remove the M3 x 4mm screws from the camera flash lid as indicated by the picture.

    • Remove the plastic cover from the flash lid by gentle pulling them apart or using the plastic opening tool.

  5. Fujifilm FinePix S8630 Flash Lid Spring  Replacement: paso 5, imagen 1 de 1
    • Fold the lid down in order to access and remove the final M3 x 4mm screw using your Philips Head Screwdriver.

  6. Fujifilm FinePix S8630 Flash Lid Spring  Replacement: paso 6, imagen 1 de 3 Fujifilm FinePix S8630 Flash Lid Spring  Replacement: paso 6, imagen 2 de 3 Fujifilm FinePix S8630 Flash Lid Spring  Replacement: paso 6, imagen 3 de 3
    • Use the plastic opening tool to pry the back and front casings of the camera apart.

    • Once pried apart use your hands to pull off the back plate of the camera.

    • You will need to apply a little bit of force to remove the back plate.

  7. Fujifilm FinePix S8630 Flash Lid Spring  Replacement: paso 7, imagen 1 de 3 Fujifilm FinePix S8630 Flash Lid Spring  Replacement: paso 7, imagen 2 de 3 Fujifilm FinePix S8630 Flash Lid Spring  Replacement: paso 7, imagen 3 de 3
    • Once the back plate is removed twist the battery cover clockwise and it should easily dislodge.

  8. Fujifilm FinePix S8630 Flash Lid Spring  Replacement, Flash Lid Spring: paso 8, imagen 1 de 2 Fujifilm FinePix S8630 Flash Lid Spring  Replacement, Flash Lid Spring: paso 8, imagen 2 de 2
    • Firmly grasp the flash bulb lid and remove the lid from the camera.

  9. Fujifilm FinePix S8630 Flash Lid Spring  Replacement: paso 9, imagen 1 de 3 Fujifilm FinePix S8630 Flash Lid Spring  Replacement: paso 9, imagen 2 de 3 Fujifilm FinePix S8630 Flash Lid Spring  Replacement: paso 9, imagen 3 de 3
    • Locate the spring and grasp with the tweezers.

    • Pinch and compress the spring to remove it from the camera housing.

    • Slide the lever that was holding the spring out of the camera housing.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Equipo

USF Tampa, Team 3-2, Sullivan Spring 2016 Miembro de USF Tampa, Team 3-2, Sullivan Spring 2016

USFT-SULLIVAN-S16S3G2

4 Miembros

12 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 4

Todo El Tiempo: 301