Repara tus cosas Comunidad Tienda

Esta guía ha sufrido modificaciones. Revisa la última versión sin revisar.

Fujifilm FinePix HS30EXR Frame Replacement

Introducción

This guide serves as a tear-down of the frame and is meant to be used with the intention of removing it. This action is needed to access the inside components.

Warning: The frame may be damaged in this process, as well as the ribbon cable that connects the motherboard with the LCD Screen. Be very careful with the removal of the frame to avoid any damage.

Qué necesitas

  1. Fujifilm FinePix HS30EXR Frame Replacement, Frame: paso 1, imagen 1 de 1

    • Flip the camera so that it is now upside down.

    • With a screwdriver, unscrew all highlighted screws.

    Traducir

  2. Fujifilm FinePix HS30EXR Frame Replacement: paso 2, imagen 1 de 1

    • Flip the camera so that it is now on the right side.

    • With a screwdriver, unscrew all highlighted screws.

    Traducir

  3. Fujifilm FinePix HS30EXR Frame Replacement: paso 3, imagen 1 de 1

    • Flip the camera so that it is now on the left side.

    • Move or remove the flap hiding the camera ports.

    • With a screwdriver, unscrew all highlighted screws.

    Traducir

  5. Fujifilm FinePix HS30EXR Frame Replacement: paso 4, imagen 1 de 1

    • Flip the camera so that it is now on the top side.

    • With a spudger, pry off the highlighted metal piece of the camera.

    Traducir

  6. Fujifilm FinePix HS30EXR Frame Replacement: paso 5, imagen 1 de 1

    • With a screwdriver, unscrew all highlighted screws.

    Traducir

  7. Fujifilm FinePix HS30EXR Frame Replacement: paso 6, imagen 1 de 1

    • Pull the LCD Screen up and out of the way.

    • With a screwdriver, unscrew all highlighted screws.

    Traducir

  8. Fujifilm FinePix HS30EXR Frame Replacement: paso 7, imagen 1 de 2 Fujifilm FinePix HS30EXR Frame Replacement: paso 7, imagen 2 de 2

    • With a spudger, pry off the frame.

    • If the frame does not easily dislodge after a few attempts, ensure that all screws are taken out.

    Traducir
Conclusión

To reassemble your device, follow these instructions in reverse order.


Autor

con 6 otros colaboradores

Andrew Scouten

Miembro Desde 10/22/18

814 Reputación

5 Guías creadas

Insignias: 10

+ 7 más insignias

Equipo

Baylor, Team S1-G2, Williams Fall 2018 Miembro de Baylor, Team S1-G2, Williams Fall 2018

BU-WILLIAMS-F18S1G2

4 Miembros

12 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 7

Todo El Tiempo: 676