Saltar al contenido principal

Fujifilm Endeavor 100ix Battery Door Replacement

Qué necesitas

  1. Fujifilm Endeavor 100ix Battery Door Replacement, Battery Door: paso 1, imagen 1 de 1
    • Locate and remove two 6.4mm screws on the bottom of the camera with a Phillips #00 screwdriver.

  2. Fujifilm Endeavor 100ix Battery Door Replacement: paso 2, imagen 1 de 1
    • Locate the battery door.

  3. Fujifilm Endeavor 100ix Battery Door Replacement: paso 3, imagen 1 de 1
    • Locate the latch on the battery door.

    • Use your finger pry to it open where it says "BATT."

  4. Fujifilm Endeavor 100ix Battery Door Replacement: paso 4, imagen 1 de 1
    • Remove the battery from the camera by pulling the battery door outward.

  5. Fujifilm Endeavor 100ix Battery Door Replacement: paso 5, imagen 1 de 1
    • Locate and remove three black 3.80mm screws on the back of the black casing with the Phillips #00 screwdriver.

  6. Fujifilm Endeavor 100ix Battery Door Replacement: paso 6, imagen 1 de 1
    • Squeeze the camera placing a thumb on the tab marked CE.

    • Pull the back half of the camera firmly away from the camera body.

  7. Fujifilm Endeavor 100ix Battery Door Replacement: paso 7, imagen 1 de 2 Fujifilm Endeavor 100ix Battery Door Replacement: paso 7, imagen 2 de 2
    • Locate and remove the 3.80mm screw that holds the plastic strip to the camera body with a Phillips #00 screwdriver.

    • The plastic strip will now come off the camera body.

Conclusión

To reassemble your device, follow these instructions in reverse order.

Eric Nicolai

Miembro Desde 01/10/11

679 Reputación

6 Guías creadas

Equipo

Cal Poly, Team 13-5, Forte Winter 2011 Miembro de Cal Poly, Team 13-5, Forte Winter 2011

CPSU-FORTE-W11S13G5

5 Miembros

11 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 3

Ultimos 30 días: 7

Todo El Tiempo: 1,859