Introducción

Use this guide to replace the battery door.

Partes

No se requieren partes.

Locate and remove two 6.4mm screws on the bottom of the camera with a Phillips #00 screwdriver.
  • Locate and remove two 6.4mm screws on the bottom of the camera with a Phillips #00 screwdriver.

Agregar Comentario

Locate the battery door.
  • Locate the battery door.

Agregar Comentario

  • Locate the latch on the battery door.

  • Use your finger pry to it open where it says "BATT."

Agregar Comentario

  • Remove the battery from the camera by pulling the battery door outward.

Agregar Comentario

  • Locate and remove three black 3.80mm screws on the back of the black casing with the Phillips #00 screwdriver.

Agregar Comentario

  • Squeeze the camera placing a thumb on the tab marked CE.

  • Pull the back half of the camera firmly away from the camera body.

Agregar Comentario

  • Locate and remove the 3.80mm screw that holds the plastic strip to the camera body with a Phillips #00 screwdriver.

  • The plastic strip will now come off the camera body.

Agregar Comentario

Conclusión

To reassemble your device, follow these instructions in reverse order.

Eric Nicolai

Miembro Desde 10/01/11

679 Reputación

6 Guías creadas

Equipo

Cal Poly, Team 13-5, Forte Winter 2011 Miembro de Cal Poly, Team 13-5, Forte Winter 2011

CPSU-FORTE-W11S13G5

5 Miembros

6 Guías creadas

Agregar Comentario

Ver Estadísticas:

Ultimas 24 Horas: 0

Últimos 7 Días: 0

Últimos 30 Días: 1

Todo El Tiempo: 1,643