Saltar al contenido principal

Fossil Speedway Watch TI-5061 Watchband Link Replacement

Qué necesitas

  1. Fossil Speedway Watch TI-5061 Watchband Link Replacement, Band Link: paso 1, imagen 1 de 1
    • Locate the link on the band with arrows pointing in opposite directions.

    • Place push pin into the hole on one side of the link.

  2. Fossil Speedway Watch TI-5061 Watchband Link Replacement: paso 2, imagen 1 de 1
    • Hit the push pin with the blunt object (we used scissors) until the small metal rod sticks out from the link.

    • Pull the rod out using your fingers.

    • Repeat on the other side to remove the entire link.

  3. Fossil Speedway Watch TI-5061 Watchband Link Replacement: paso 3, imagen 1 de 2 Fossil Speedway Watch TI-5061 Watchband Link Replacement: paso 3, imagen 2 de 2
    • To replace the link, insert the open end of one of the connected links into the open end of the new link.

    • Place the rod into the aligning holes and use the blunt object to hammer the rod into the link.

    • Repeat on the other side of the link to remove it completely.

Conclusión

To reassemble your device, follow these instructions in reverse order.

2 personas más completaron esta guía.

Zachary Price

Miembro Desde 04/28/15

588 Reputación

3 Guías creadas

Equipo

Cal Poly, Team 14-10, Amido Spring 2015 Miembro de Cal Poly, Team 14-10, Amido Spring 2015

CPSU-AMIDO-S15S14G10

3 Miembros

5 Guías creadas

Un comentario

Looking for 3 extra watch band links for a fossil big tic model jr8622 18mm width could you tell me please how much this will cost please with delivery as well to croydon in Surrey

Kind regards colin

Colin Evans - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 5

Ultimos 30 días: 18

Todo El Tiempo: 1,328