Introducción
This guide will primarily uses Push-pins. There is potential to hurt yourself with the pin. Be careful with the spring-loaded pin holding the clasp as it may bounce out of place.
Qué necesitas
-
-
Keep clasp in open position.
-
Push one of the spring-loaded pins out of the hole with a Push-pin.
-
Wiggle watch band and clasp till free from each other.
-
-
To reassemble your device, follow these instructions in reverse order.
To reassemble your device, follow these instructions in reverse order.
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.