Repara tus cosas Comunidad Tienda

FoodSaver V4980 Seal Profile Replacement

Introducción

In this guide, we will outline how to properly unhinge the rubber seal profile and replace it after cleaning or with a new seal profile.

  1. FoodSaver V4980 Seal Profile Replacement, Seal Profile: paso 1, imagen 1 de 1

    • Open the drawer on the bottom side of the FoodSaver first.

    Editar

  3. FoodSaver V4980 Seal Profile Replacement: paso 2, imagen 1 de 1

    • Gently pull the sides of the rubber seal profile with a finger and remove it from the device.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

3 personas más completaron esta guía.

Autor

con 2 otros colaboradores

Mackenzie Grossgold

Miembro Desde 04/14/16

940 Reputación

6 Guías creadas

Insignias: 14

+ 11 más insignias

Equipo

Cal Poly, Team 34-17, Maness Spring 2016 Miembro de Cal Poly, Team 34-17, Maness Spring 2016

CPSU-MANESS-S16S34G17

4 Miembros

6 Guías creadas

2 comentarios

Does anyone else have difficulty pulling the drip tray out? I’ve released the tabs on the bottom of the unit and tried pulling on the tray. I detect some movement but it won’t come out. If I pull any harder, I’ll probably break it.

Jerry - Contestar

Who sells the parts for the Food Saver?

Bruce Carlton - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 3

Ultimos 7 días: 10

Ultimos 30 días: 33

Todo El Tiempo: 9,120