Saltar al contenido principal

Floor Pump Drive Hose Replacement

Qué necesitas

  1. Floor Pump Drive Hose Replacement, Drive Hose: paso 1, imagen 1 de 3 Floor Pump Drive Hose Replacement, Drive Hose: paso 1, imagen 2 de 3 Floor Pump Drive Hose Replacement, Drive Hose: paso 1, imagen 3 de 3
    • Use a pair of pliers to loosen the hose pinch by turning it counterclockwise a couple of turns.

    • Continue to loosen the hose pinch by hand until it comes free from its threads.

    • Slide the hose pinch down the tube so that it does not interfere with removing the hose.

  2. Floor Pump Drive Hose Replacement: paso 2, imagen 1 de 3 Floor Pump Drive Hose Replacement: paso 2, imagen 2 de 3 Floor Pump Drive Hose Replacement: paso 2, imagen 3 de 3
    • Using a hobby knife, carefully slice a slit in the bottom of the hose to allow it to slide off.

    • Be careful and go slowly so as not to damage the nipple underneath.

    • Use a metal prying tool or flathead screwdriver to pry the hose up off of the nipple.

    • Remove the hose from the pump.

  3. Floor Pump Drive Hose Replacement: paso 3, imagen 1 de 2 Floor Pump Drive Hose Replacement: paso 3, imagen 2 de 2
    • Slide the hose pinch off of the end of the old hose and onto the new hose.

    • Be sure that the threaded end of the hose pinch faces toward the open end of the new hose.

  4. Floor Pump Drive Hose Replacement: paso 4, imagen 1 de 3 Floor Pump Drive Hose Replacement: paso 4, imagen 2 de 3 Floor Pump Drive Hose Replacement: paso 4, imagen 3 de 3
    • Use a metal rod or screwdriver to widen the new hose so that it will fit over the nipple.

    • Slide the hose in place.

    • Push down on the hose clamp while twisting it clockwise to thread it in place.

Linea de Meta

Una persona más ha completado esta guía.

iRobot

Miembro Desde 09/24/09

1 Reputación

636 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 1

Ultimos 30 días: 5

Todo El Tiempo: 2,111