Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove metal sticker under the LCD screen with a spudger.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the 4 gray screw caps with the spudger. These cover the screw heads and protect from dirt or grime.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the 5 10mm screws with the #00 Phillips screwdriver. These connect the back of the outer shell to the front of the outer shell.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Open battery door. This can be done by gently depressing and sliding the battery down downward.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Use the spudger to separate outer shells.
-
The spudger must be inserted between the shell halves to pry the edges apart.
-
Slowly work around the outside to separate the halves.
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Remove the silicone directional pad insert from the front outer shell.
-
Clean the buttons with soapy water before reassembling the device.
-
Cancelar: No complete esta guía.
Una persona más ha completado esta guía.