Esta versión puede contener ediciones incorrectas. Cambie a la última instantánea verificada.
Qué necesitas
-
Este paso está sin traducir. Ayuda a traducirlo
-
With the Phillips screwdriver 000, unscrew the two small screws securing the battery to the outer case and set safely aside.
-
With the plastic opening tool, pry the battery out of device and set aside. Now the battery is fully removed.
-
-
-
Este paso está sin traducir. Ayuda a traducirlo
-
Using Phillips screwdriver 000, unscrew the 4 screws from the outer casing. Now the small white microphone should disconnect and is free to be set aside.
-
With Phillips screwdriver 000, unscrew the 3 screws which secure the aluminum USB bracket.
-
Using tweezers, remove the USB port from the device. Your device is now a skeleton and is ready for replacement. To do so, follow these steps backwards.
-
Equipo
Eastern Washington University, Team 2-1, Andersen Winter 2016 Miembro de Eastern Washington University, Team 2-1, Andersen Winter 2016
EWU-ANDERSEN-W16S2G1
4 Miembros
10 Guías creadas
