Repara tus cosas Comunidad Tienda

Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler

Introducción

This guide will teach you how to fix a jammed paper-roll in your Brother PT-90 Label-Maker.

Qué necesitas

  1. Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler, Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: paso 1, imagen 1 de 3 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler, Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: paso 1, imagen 2 de 3 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler, Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: paso 1, imagen 3 de 3

    • Turn your label-maker on its face. Using your thumb, press in and then upward on the fastener located on the side of your device.

    Editar

  2. Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: paso 2, imagen 1 de 3 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: paso 2, imagen 2 de 3 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: paso 2, imagen 3 de 3

    • Remove the batteries from your device.

    Editar

  4. Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: paso 3, imagen 1 de 3 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: paso 3, imagen 2 de 3 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: paso 3, imagen 3 de 3

    • Using a plastic opening tool from your iFixit tool kit, leverage the label cartridge out of your device.

    Editar

  5. Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: paso 4, imagen 1 de 3 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: paso 4, imagen 2 de 3 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: paso 4, imagen 3 de 3

    • Press the label paper back into alignment with the small holders on the right side of the label cartridge.

    Editar

  6. Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: paso 5, imagen 1 de 3 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: paso 5, imagen 2 de 3 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: paso 5, imagen 3 de 3

    • Place the label cartridge and batteries back into your device. Refasten the bottom case of the label-maker.

    Editar

  7. Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: paso 6, imagen 1 de 3 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: paso 6, imagen 2 de 3 Fixing a Jammed Paper-Roll in your Brother PT-90 Personal Labeler: paso 6, imagen 3 de 3

    • Well done! You have successfully corrected the paper-jam in your Brother PT-90 Label-Maker.

    Editar
Conclusión

To reassemble your device, follow these instructions in reverse order.

Autor

con 4 otros colaboradores

Kaitlyn Abrams

Miembro Desde 10/13/16

1 Reputación

1 Guía escrita

Insignias: 2

Equipo

University of Maine, Team 2-1, Diaz Fall 2016 Miembro de University of Maine, Team 2-1, Diaz Fall 2016

UMAINE-DIAZ-F16S2G1

3 Miembros

2 Guías creadas

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 0

Ultimos 30 días: 5

Todo El Tiempo: 784