Saltar al contenido principal

Qué necesitas

Este desmontaje no es una guía de reparación. Para reparar tu Fitbit Charge HR, utiliza nuestros manuales de servicio .

  1. Este paso está sin traducir. Ayuda a traducirlo

    : paso 1, imagen 1 de 1
    • Take the 4 Screws out of the Sides you will need a T3 star Screw Driver

  2. Este paso está sin traducir. Ayuda a traducirlo

    : paso 2, imagen 1 de 2 : paso 2, imagen 2 de 2
    • You Pry out the Main board you can see the Metal Hooks

  3. Este paso está sin traducir. Ayuda a traducirlo

    : paso 3, imagen 1 de 1
    • You can Then pull out the Screws from around the Screen

Bradley Nelson

Miembro Desde 03/08/16

56 Reputación

1 Guía escrita

8 comentarios

Can the battery be replaced?

Rick - Contestar

Mine was just over a year old (barely out of warranty) when it died. The Fitbit folks were kind enough to replace it anyway once I expressed my displeasure. I'd haggle with them a bit before going the DIY route but I'm definitely keeping my old one for spare parts. Hopefully someone will point out an aftermarket battery source before I need to do that.

fragmasterflash - Contestar

The screws in mine were Torx T-2, not T-3.

Jake McIvor - Contestar

The button is stuck in my ChargeHR. I bought the T3 screwdriver and it is too big. Either the screws are T2 or my screwdriver is too much imprecise.

Anyone fixed a stuck button?

Anderson Maciel - Contestar

it definitely not T3 must be T2

Marc Frederick - Contestar

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 1

Ultimos 7 días: 5

Ultimos 30 días: 21

Todo El Tiempo: 23,952