Saltar al contenido principal

Filter Housing Replacement for GE Refrigerators model GSS25KSW / GSF25KGW

Qué necesitas

  1. Filter Housing Replacement for GE Refrigerators model GSS25KSW / GSF25KGW, Filter Housing for GE Refrigerators: paso 1, imagen 1 de 1
    • Disconnect the electric plug from the wall.

  2. Filter Housing Replacement for GE Refrigerators model GSS25KSW / GSF25KGW: paso 2, imagen 1 de 1
    • Turn off or push down off water main valve from the wall.

  3. Filter Housing Replacement for GE Refrigerators model GSS25KSW / GSF25KGW: paso 3, imagen 1 de 3 Filter Housing Replacement for GE Refrigerators model GSS25KSW / GSF25KGW: paso 3, imagen 2 de 3 Filter Housing Replacement for GE Refrigerators model GSS25KSW / GSF25KGW: paso 3, imagen 3 de 3
    • Remove the back panel with 6 screws from the back panel using a 8 mm nut driver.

  4. Filter Housing Replacement for GE Refrigerators model GSS25KSW / GSF25KGW: paso 4, imagen 1 de 2 Filter Housing Replacement for GE Refrigerators model GSS25KSW / GSF25KGW: paso 4, imagen 2 de 2
    • Disconnect the water supplied line from the refrigerator using two 13 mm open-end wrenches.

    • Use a little bucket to receive the water from the water lines.

  5. Filter Housing Replacement for GE Refrigerators model GSS25KSW / GSF25KGW: paso 5, imagen 1 de 1
    • Disconnect the water line from the water inlet valve using and open-end wrench size 15mm

  6. Filter Housing Replacement for GE Refrigerators model GSS25KSW / GSF25KGW: paso 6, imagen 1 de 2 Filter Housing Replacement for GE Refrigerators model GSS25KSW / GSF25KGW: paso 6, imagen 2 de 2
    • Disconnect the water line cover removing 2 screws using a 7 mm nut driver.

    • Pull up the gum seal compound.

  7. Filter Housing Replacement for GE Refrigerators model GSS25KSW / GSF25KGW: paso 7, imagen 1 de 1
    • Push the left side of the filter cover and pull it straight out.

  8. Filter Housing Replacement for GE Refrigerators model GSS25KSW / GSF25KGW: paso 8, imagen 1 de 2 Filter Housing Replacement for GE Refrigerators model GSS25KSW / GSF25KGW: paso 8, imagen 2 de 2
    • Remove the 2 screws on top of the housing using 7 mm nut driver.

    • Pull the housing and filter out slowly.

    • Remove the filter by turn it counterclockwise

Conclusión

To reassemble your device, follow these instructions in reverse order.

Giancarlo Marruffo

Miembro Desde 09/18/16

2 Reputación

1 Guía escrita

Equipo

0 comentarios

Agregar Comentario

Ver Estadísticas:

Ultimas 24 horas: 0

Ultimos 7 días: 4

Ultimos 30 días: 21

Todo El Tiempo: 2,071