Fiat Stop Light Replacement

Remove the two 10 mm bolts to the side of the taillight.

Using a pry tool or something flat, carefully get in-between the light and the car and pry the light off.

Remove the burnt out bulb by pulling it out from the panel.

Clip the panel back onto the light and put it back into the frame of the car.

Replace the two bolts with a 10 mm socket.

Open the hatch door and locate the two screws under the hatch lip. Then, use the 10mm socket and unscrew both top and bottom screws.

Remove the screws by hand. Then, remove plastic casing from the body.

Remove the casing carefully. There is a wire harness that needs to be disconnected. See red line under the wire harness.

Carefully insert a flat head screw driver into the lock lip while simultaneously pulling the harness out of its socket.

Insert wisdom here.